Description
The Goss GE573 Fuel Pump Module is a premium aftermarket in-tank electric fuel pump assembly designed as a direct-fit replacement for specific Holden Barina TM series vehicles produced between 2011 and 2019. It covers the 4-door hatchback and sedan variants equipped with 1.4-litre and 1.6-litre I4 16V petrol engines, matching the chassis and engine codes TF48E, TA48E, TA69E, TF69E, TA488 and TF488.
These Barina TM models, based on the Chevrolet Sonic/Aveo platform and built in South Korea, use a returnless fuel system. The GE573 module sits inside the fuel tank and integrates the electric pump, strainer (filter sock), fuel level sender and, on most variants, an internal pressure regulator and primary filter. This compact design supplies pressurised fuel to the multi-point fuel injection system at the correct volume and pressure (typically in the 380–400 kPa / 55–58 psi range for these engines) under all operating conditions.
Vehicle Compatibility and Engine Details
The module is listed for:
- Holden Barina TM 1.6 i (F16D4 I4 16V DOHC VVT MPFI, approximately 85 kW) from late 2011 through 2018/2019 in both manual and automatic 4-door hatch and sedan forms (TF48E, TA48E, TA69E, TF69E).
- Holden Barina TM RS Turbo 1.4 (A14NET / LUJ I4 16V DOHC VVT turbo, approximately 103 kW) from 2013–2016/2017 (TA488, TF488).
Always verify exact fitment against the vehicle’s VIN, chassis code and engine code, as minor production variations can exist. Goss designs its modules as application-specific rather than universal “one-size-fits-all” units, ensuring the mounting flange, electrical connector, fuel line outlets, strainer shape and level-sender calibration match the original equipment (OE) part.
Why the Fuel Pump Module Matters
In modern petrol engines like those in the Barina TM, the fuel pump is critical. It draws fuel from the tank, pushes it through the strainer to remove debris, and delivers a steady supply at the pressure the engine control module (ECM) expects. The integrated level sender provides accurate fuel-gauge readings to the instrument cluster. Because the pump is immersed in fuel, the petrol itself provides cooling and lubrication. Running the tank consistently near empty can overheat the pump and shorten its life. Contaminated fuel or a clogged strainer forces the motor to work harder, accelerating wear.
Common failure symptoms on these Barinas include:
- Extended cranking or no-start, especially after the car has sat or on hot days.
- Noticeable high-pitched whine or humming from under the rear seat.
- Hesitation, flat spots or power loss under acceleration or on hills.
- Stalling at idle or under load.
- Erratic fuel gauge readings.
- Diagnostic trouble codes related to lean mixture or low fuel pressure.
There was also a safety recall (PRA 2016/15156) covering certain 2011–2013 TM Barinas regarding an incorrectly sized fuel-pump O-ring seal that could potentially leak in a rollover scenario. This highlights the importance of correct sealing components during any service work.
Features and Quality of the Goss GE573
Goss has a long-standing reputation in the Australian aftermarket for fuel-system components that meet or exceed OE performance and fitment. The GE573 is supplied as a complete module rather than a bare pump, which simplifies installation and reduces the risk of mismatched senders or regulators. Key points include:
- Direct OE-style fitment for the listed applications.
- Matching strainer that seats correctly in the tank or swirl pot.
- Compatible electrical connector and fuel-line fittings.
- 2-year – 40,000 km manufacturer guarantee (typical for the Goss range).
The primary filter is usually integral to the module on these TM models and is not a routine service item, so replacing the entire assembly addresses both the pump motor and filtration in one operation.
Installation Overview
Replacement is generally straightforward and does not require dropping the fuel tank on most TM Barinas. Access is via an inspection cover under the rear seat cushion. Standard procedure includes:
- Depressurising the fuel system (remove the fuel-pump fuse or relay and run the engine until it stalls, or use the service procedure).
- Disconnecting the battery.
- Removing the rear seat base and cleaning around the access cover to prevent dirt entering the tank.
- Disconnecting the electrical connector and fuel lines.
- Removing the lock ring (special tool often required).
- Lifting out the old module, transferring any necessary components if required, and installing the new module with a fresh sealing gasket or O-ring.
- Reassembling, reconnecting power, and verifying fuel pressure, gauge accuracy and leak-free operation.
Professional installation is recommended because of the flammable fuel and the need for correct torque on the lock ring and proper sealing. After fitting, a short road test and scan for residual codes is good practice.
Maintenance Tips for Longevity
- Avoid repeatedly running the tank below a quarter full so the pump stays cooled by fuel.
- Use quality unleaded petrol; excessive contamination or water shortens component life.
- Address any fuel-system leaks or electrical issues promptly (check the dedicated fuel-pump fuse—often 20 A—and relay).
- When replacing the module, always fit a new tank seal/gasket and clean the tank flange thoroughly.
The Goss GE573 provides a reliable, OE-matching solution for owners of 2011–2019 Holden Barina TM 1.4- and 1.6-litre models experiencing fuel-delivery problems. By restoring correct pressure, volume and gauge accuracy, it returns the vehicle to smooth starting, responsive acceleration and dependable everyday performance. Always confirm the latest application data and follow proper safety procedures when working on the fuel system.








Reviews
There are no reviews yet.