Description
The Goss GE574 Fuel Pump Module is a high-quality aftermarket in-tank electric fuel pump assembly engineered as a direct-fit replacement for Holden Captiva CG series vehicles, particularly the Captiva 5 models with chassis codes DF26 and DA26 from 2011–2012 equipped with the 2.4-litre I4 16V petrol engine. It also covers a broader range of related Captiva CG variants, including both front-wheel-drive and all-wheel-drive configurations with 2.4L and 3.0L petrol engines across 2011–2018 model years.
The Holden Captiva CG (also known as Captiva 5 for the five-seater and Captiva 7 for the seven-seater versions) is a mid-size crossover SUV based on the GM Theta platform. The 2.4-litre LE5 engine (DOHC 16-valve with variable valve timing and multi-point fuel injection) produces approximately 123 kW and is paired with either a six-speed manual or automatic transmission in the DF26 (manual) and DA26 (automatic) 4-door SUV body styles. These vehicles use a returnless fuel delivery system in which the complete pump module resides inside the fuel tank.
Role of the Fuel Pump Module
The GE574 module combines several critical components into a single assembly: the electric fuel pump motor, a fine-mesh strainer (sock filter) that prevents debris from entering the system, the fuel level sender unit that reports tank contents to the instrument cluster, and typically an integrated pressure regulator and primary filter. Its job is to draw petrol from the tank and deliver it at a consistent pressure and volume to the fuel injectors so the engine control module can maintain precise air-fuel ratios under all conditions-idle, acceleration, highway cruising, and load.
Because the pump is submerged in fuel, the petrol itself cools and lubricates the electric motor. Consistently running the tank near empty deprives the pump of this cooling, accelerating wear. Contaminated fuel or a clogged strainer forces the motor to work harder, reducing lifespan and potentially causing pressure drop.
Compatibility Details
According to supplier listings, the Goss GE574 suits:
- Holden Captiva 5 CG 2.4 i (LE5) 2011–2015 (including Flex-fuel variants)
- Holden Captiva 7 CG 2.4 i 2011–2018
- Holden Captiva CG 3.0 i AWD and Flex-fuel AWD variants 2011–2018
Specific early applications include the DF26 (manual) and DA26 (automatic) 4-door SUVs with the 2.4-litre LE5 engine produced from approximately January 2011 to mid-2012. Cross-referenced OEM numbers commonly associated with this module include 13515698 and 13579878.
Always confirm fitment against the vehicle’s VIN, chassis code, engine code and production date, as fuel-system details can vary slightly within the CG series.
Goss Quality and Design Philosophy
Goss has supplied the Australian and New Zealand automotive aftermarket for decades and is recognised for application-specific rather than universal “one-size-fits-all” fuel pumps. The GE574 is built to match original-equipment performance, fitment and electrical characteristics. Key attributes include:
- Correct mounting flange and lock-ring interface for the Captiva fuel tank
- Matching electrical connector pin-out and fuel-line quick-connect fittings
- OE-style strainer that seats properly in the tank reservoir or swirl pot
- Calibrated fuel-level sender for accurate gauge readings
- Typical manufacturer warranty of 1–2 years – 40,000 km (confirm with the specific supplier)
Because the primary filter is usually integral to the module on these models, replacing the complete assembly restores both pumping performance and filtration in one operation.
Common Failure Symptoms
Owners of 2011–2012 Captiva 5 2.4-litre models may notice the following signs of a failing fuel pump module:
- Prolonged cranking or failure to start, especially after the vehicle has sat or on hot days
- High-pitched whine or humming noise from the rear of the vehicle (under the cargo area or rear seat)
- Hesitation, surging or power loss under acceleration or when climbing hills
- Stalling at idle or under light load
- Inaccurate or erratic fuel-gauge readings
- Diagnostic trouble codes related to lean mixture, low fuel pressure or fuel-system performance
These symptoms can also cause by a faulty fuel-pump relay, blown fuse, wiring issues or severe tank contamination. Thus, proper diagnosis (fuel-pressure testing and electrical checks) recommends before replacement.
Installation Considerations
On most Captiva CG models the fuel pump module access through a service cover under the rear seat or cargo-area floor rather than by dropping the entire tank. The general procedure involves:
- Relieving fuel-system pressure (by removing the fuel-pump fuse or relay and running the engine until it stalls, or following the manufacturer’s service method).
- Disconnecting the negative battery terminal.
- Removing the rear seat cushion or cargo floor cover and cleaning the area thoroughly to prevent dirt from falling into the tank.
- Disconnecting the electrical connector and fuel lines.
- Removing the lock ring (a special tool often require).
- Carefully lifting out the old module, transferring any non-included components if necessary, and installing the new GE574 with a fresh tank seal or O-ring.
- Reassembling, restoring power, and verifying correct fuel pressure, gauge operation and absence of leaks.
Professional installation strongly advise because of the presence of flammable fuel and the need for correct sealing and torque values. After fitting, a short road test and a scan for residual diagnostic codes complete the job.
Maintenance Advice for Longevity
- Keep at least a quarter tank of fuel whenever possible so the pump remains immersed and cooled.
- Use quality unleaded petrol and avoid contaminated or water-contaminated fuel.
- Address any electrical issues (relay, fuse or wiring) promptly.
- When replacing the module, always fit a new sealing gasket and ensure the tank flange is clean and free of debris.
The Goss GE574 Fuel Pump Module offers a reliable, OE-matching solution for owners of 2011–2012 Holden Captiva 5 CG DF26/DA26 2.4-litre models (and the wider CG family) experiencing fuel-delivery problems. By restoring correct pressure, volume and level-sender accuracy, it returns the vehicle to smooth starting, responsive performance and dependable everyday operation. Always verify the latest application data for your specific vehicle and follow proper safety procedures when working on the fuel system.






Reviews
There are no reviews yet.