Description
The fuel pump module is a key component in the fuel delivery system of the Peugeot 306. For XT models in the N5 series produced between 1997 and 2003, covering both 2-door and 4-door body styles equipped with the 2.0-litre inline-four 16-valve engine, the GE582 fuel pump module offers a direct-fit aftermarket replacement. This Goss unit is designed to restore reliable fuel supply, filtration, and level sensing when the original in-tank assembly fails, helping the vehicle maintain its characteristic responsiveness and everyday usability.
The Peugeot 306 of this generation was a popular compact car known for its agile handling, practical packaging, and a range of efficient engines. The 2.0-litre I4 16-valve unit (commonly the RFV-XU10J4R or similar) delivered lively performance for its class and required consistent low-pressure fuel delivery from the tank to support the multi-point injection system. The fuel pump module resides inside the fuel tank and must operate reliably under vibration, temperature changes, and the demands of daily driving.
Role of the Fuel Pump Module
The GE582 is a complete in-tank assembly that typically includes the electric fuel pump, inlet strainer, fuel level sending unit, and supporting housing. Its primary functions are:
- Drawing fuel from the tank and delivering it under the required pressure toward the engine
- Filtering contaminants through the integrated strainer to protect the pump and downstream components
- Measuring remaining fuel volume and communicating that information to the instrument cluster
- Maintaining a sealed interface with the tank to minimise vapour leaks and air entry
Because the module operates whenever the ignition is switched on, it experiences continuous duty and gradual wear from heat, sediment, and fuel chemistry.
Common Symptoms of Failure
Owners of 1997–2003 Peugeot 306 XT N5 2-door and 4-door models fitted with the 2.0-litre I4 16V engine frequently notice the following when the original module begins to deteriorate:
- Hard starting or extended cranking times
- Loss of power during acceleration or under load
- Intermittent stalling or hesitation
- Rough running or uneven idle quality
- Inaccurate or fluctuating fuel-gauge readings
- Unusual humming, buzzing, or high-pitched noises from the rear of the vehicle
- Complete no-start condition once adequate fuel pressure can no longer be generated
These symptoms can sometimes be mistaken for other issues such as a clogged fuel filter, faulty relay, or ignition problems, so accurate diagnosis is recommended before replacement.
Key Features of the GE582 Module
The GE582 is engineered as a direct-fit replacement intended to match original-equipment performance and geometry. Characteristic attributes include:
- Complete module assembly incorporating the pump, strainer, and level sender
- Electrical connectors and fuel-line fittings that align with factory specifications
- Correct physical dimensions and locking interface for straightforward installation
- Durable construction suited to the environment inside the fuel tank
- Flow and pressure characteristics appropriate for the 2.0-litre I4 16-valve engine
- Integrated strainer designed to capture debris and protect the pump
Goss modules are generally built to OE-equivalent standards and often carry a manufacturer warranty, making them a practical alternative to genuine parts while preserving system integrity.
Vehicle Fitment Overview
The GE582 is specified for:
- Peugeot 306 XT models
- N5 series (and closely related codes such as 7A, 7B, 7C, N3)
- Production years approximately 1997–2003
- 2-door and 4-door body styles
- 2.0-litre I4 16-valve petrol engines
Exact compatibility should always confirm using the vehicle’s VIN, engine code, production date, and any market-specific variations. Differences can exist between hatchback, sedan, and convertible variants, as well as between early and late production vehicles.
Installation Considerations
Access to the fuel pump module on the 306 is typically gained through the rear seat or boot area. A representative replacement sequence includes:
- Safely supporting the vehicle and relieving residual fuel-system pressure
- Disconnecting the battery and relevant electrical connectors
- Removing the rear seat or access panel to reach the module
- Disconnecting fuel lines and the electrical plug
- Releasing the locking ring or retaining mechanism
- Extracting the old unit and thoroughly cleaning the sealing surface
- Installing the new GE582 assembly with a fresh seal or O-ring
- Reassembling components and verifying the system is free of leaks after priming
Correct orientation of the level-sender float and proper seating of the seal are essential details. Many owners with mechanical experience complete the work themselves; others prefer professional installation to ensure correct procedure and safety.
Benefits of a Quality Replacement Module
Selecting a properly matched unit such as the GE582 offers several practical advantages:
- Restores consistent starting and smooth power delivery
- Helps protect the remainder of the fuel and injection system
- Returns accurate fuel-level information to the driver
- Provides a cost-effective alternative to genuine modules in many cases
- Delivers OEM-style fitment without requiring modifications
- Supports the everyday reliability expected from the 306
Inferior or incorrectly specified pumps risk early failure, incorrect pressure, or inaccurate gauge readings, potentially introducing new problems rather than solving the original ones.
Practical Maintenance Advice
To help extend the service life of the fuel pump module and the broader fuel system, owners advise to:
- Use clean, high-quality fuel from reputable sources
- Avoid repeatedly running the tank to extremely low levels, which can overheat the pump or draw sediment
- Address any fuel-related warning lights or performance changes promptly
- Inspect related components during routine servicing
- Consider the condition of ageing fuel lines and seals on these older vehicles
Consistent attention to these points reduces the likelihood of premature failure and helps maintain the vehicle’s efficiency and drivability.
Conclusion
The GE582 fuel pump module is a purpose-designed replacement for the 1997–2003 Peugeot 306 XT N5 2-door and 4-door models equipped with the 2.0-litre I4 16-valve engine. By restoring correct fuel delivery, pressure generation, filtration, and level sensing in a single assembly, it addresses the common failure modes of the original in-tank unit. When symptoms such as hard starting, power loss, or erratic gauge behaviour appear, a correctly specified module like the GE582 provides an effective and practical solution.
Paired with accurate diagnosis, careful installation, and ongoing attention to fuel quality, this component helps return the 306 to the agile and practical performance its owners expect. Always verify fitment details against the specific vehicle before purchase, and consider professional assistance if the replacement procedure is outside your experience level. A well-chosen fuel pump module remains an important investment in keeping this popular Peugeot compact running reliably for many more kilometres.






Reviews
There are no reviews yet.