Description
Keep your Toyota Camry operating with dependable fuel delivery using this replacement Fuel Pump Module, designed for selected Toyota Camry ACV36–MCV36 models from 2002 to 2006. This replacement fuel pump assembly is suitable for applicable 4-door Camry vehicles equipped with 2.4-litre to 3.0-litre I4 or V6 petrol engines, covering engines with 16 to 24 valves, depending on the specific vehicle application.
The fuel pump is an essential component of the vehicle’s fuel system. It transfers fuel from the fuel tank to the engine while maintaining the fuel supply required for proper engine operation. Over time, the original pump can become worn, weak, noisy, or unreliable. Replacing a faulty fuel pump module can help restore consistent fuel delivery and dependable starting and driving performance.
Designed for Toyota Camry ACV36–MCV36
This fuel pump module is intended for selected Toyota Camry ACV36–MCV36 vehicles manufactured from 2002 through 2006. The listed application covers 4-door models equipped with either an I4 or V6 petrol engine, with engine capacities ranging from approximately 2.4 litres to 3.0 litres.
The product reference GE414 can be used as an additional identification reference when comparing replacement parts.
Because Toyota vehicles can have different specifications depending on the production year, engine, transmission, and market, it is important to confirm compatibility before ordering. The chassis code, engine specification, original fuel pump design, electrical connector, and mounting arrangement should be compared with the replacement module.
Reliable Fuel Delivery
The fuel pump module plays a major role in maintaining the correct fuel supply to the engine. When the pump operates correctly, fuel can be delivered consistently during engine starting, idling, acceleration, and normal driving.
A worn or failing fuel pump may cause a number of noticeable symptoms. These can include difficult starting, longer-than-normal cranking, hesitation under acceleration, reduced engine performance, intermittent stalling, or unusual sounds coming from the fuel tank area.
In some cases, a failing fuel pump may work intermittently. The vehicle might start and drive normally one day and then develop starting or stalling problems later. If fuel pressure is inconsistent, the engine may also struggle under heavier loads or higher speeds.
Replacing the fuel pump module when the original component has been confirmed as faulty can help restore reliable fuel delivery.
Replacement Fuel Pump Module
This replacement assembly is designed as a practical alternative to a worn or failed original fuel pump module. The fuel pump module is installed inside the fuel tank and forms part of the vehicle’s fuel delivery system.
Depending on the exact application, a fuel pump module may incorporate several components, including the electric fuel pump, fuel level sender, fuel pickup components, strainer, housing, and electrical connections.
Replacing the complete module can simplify the repair when multiple components within the original assembly have become worn. It can also be a practical option for older vehicles where the original fuel pump assembly has accumulated many years of use.
This product is intended as a replacement part, not a performance modification. Its purpose is to provide the fuel delivery function required for normal vehicle operation.
Suitable for I4 and V6 Applications
The listed application covers Toyota Camry models with 2.4-litre I4 and 3.0-litre V6 petrol engines, depending on the exact vehicle specification. The valve configuration may range from 16V to 24V.
Since different engines can use different fuel system components, confirming the exact engine and original fuel pump assembly is essential before installation. The chassis code alone should not be treated as the only method of confirming compatibility.
When ordering, compare the following details with your vehicle:
- Make: Toyota
- Model: Camry
- Chassis-application: ACV36–MCV36
- Model years: 2002–2006
- Body style: 4 Door
- Engine range: 2.4–3.0 Litre
- Engine type: I4 – V6
- Valve configuration: 16–24V
- Reference: GE414
- Original fuel pump connector
- Fuel pump mounting arrangement
- Fuel tank configuration
Original part number, where available
Common Signs of Fuel Pump Problems
A failing fuel pump does not always stop working suddenly. In many cases, the pump gradually becomes weaker and produces warning signs before complete failure.
Possible symptoms include:
- Engine takes longer to start
- Vehicle is difficult to start when warm
- Intermittent engine stalling
- Engine hesitation during acceleration
- Loss of power under load
- Poor or inconsistent fuel delivery
- Unusual whining or humming from the fuel tank
- Engine may struggle at higher speeds
- Vehicle may stop unexpectedly
- Fuel pressure may be below specification
These symptoms can also be caused by other fuel-system or electrical problems. Before replacing the part, it is recommended to check fuel pressure and inspect related components such as the fuel filter, fuel lines, wiring, relay, electrical connectors, and fuel injectors where appropriate.
Installation Considerations
Fuel pump replacement involves working with petrol and components located inside the fuel tank. Appropriate safety procedures should always be followed.
The vehicle should be parked in a safe, well-ventilated area away from flames, sparks, cigarettes, and other potential ignition sources. The fuel system should be depressurised using the correct procedure before removing the original fuel pump assembly.
During installation, inspect the fuel lines, electrical connectors, seals, and mounting components carefully. The fuel pump module should be installed correctly and securely, with all connections properly fitted.
After installation, the fuel system should be checked carefully for leaks before the vehicle is returned to normal operation. If fuel leakage or abnormal operation is detected, the vehicle should not be driven until the problem has been corrected.
Professional installation is recommended for anyone who is not experienced with automotive fuel-system repairs.
Check Compatibility Before Ordering
Although this fuel pump module is listed for Toyota Camry ACV36–MCV36 2002–2006 4-door models with 2.4–3.0 litre I4-V6 engines, vehicle specifications can vary between production years and markets.
For the best fit, always compare the original fuel pump module with the replacement before purchasing. Pay particular attention to the connector design, mounting points, fuel sender arrangement, pump configuration, and vehicle engine specification.
Practical Replacement for Your Camry
The GE414 part provides a practical replacement option for compatible Toyota Camry vehicles experiencing fuel pump wear or failure. Designed for selected ACV36–MCV36 models from 2002 to 2006, the application covers 4-door vehicles with 2.4-litre I4 through 3.0-litre V6 engines and 16–24 valve configurations.
A correctly functioning fuel pump is essential for reliable starting, consistent fuel delivery, and normal engine operation. If the original pump has become weak, noisy, intermittent, or has failed completely, replacing the fuel pump module may help restore dependable operation.
Always verify the exact vehicle and original component specifications before ordering to ensure the GE414 fuel pump module is the correct replacement for your Toyota Camry.
Reviews
There are no reviews yet.