Description
The OX827 Oxygen Sensor is listed for selected Honda Accord VTS CL and CL3 applications from 2000 to 2002, equipped with a 2.0-litre, four-cylinder, 16-valve engine. An oxygen sensor is an important component of the engine management and exhaust emissions control systems. It measures the oxygen content in the exhaust gases and sends information to the engine control unit (ECU), helping the system regulate the air-fuel mixture and monitor emissions performance.
A properly functioning oxygen sensor supports consistent engine operation, appropriate fuel control and effective emissions monitoring. Over time, the original sensor may become contaminated, less responsive or electrically faulty because of prolonged exposure to exhaust heat and normal wear. When this happens, the vehicle may develop a check engine warning light, increased fuel consumption, rough idling or emissions-related problems.
The OX827 listing provides a reference for buyers seeking a replacement oxygen sensor for selected Honda Accord applications. However, compatibility should always be confirmed before ordering. Sensor specifications can vary according to the exact engine code, production date, market specification, emissions equipment and installation position. Checking the vehicle identification number (VIN) and original equipment (OE) part number helps ensure the replacement is appropriate for the vehicle.
Product Specifications
- Product Name: Oxygen Sensor
- Product Code: OX827
- Vehicle Make: Honda
- Vehicle Model: Accord VTS
- Model Series: CL – CL3, as listed
- Listed Model Years: 2000–2002
- Body Style: 4 Door
- Listed Engine Capacity: 2.0 Litre
- Engine Configuration: Inline 4-Cylinder (I4)
- Valve Configuration: 16-Valve
- System: Engine Management and Exhaust Emissions Monitoring
- Primary Function: Measures oxygen content in exhaust gases and provides feedback to the ECU
- Fitment Verification: Required before installation
These specifications are based on the supplied product title. The precise sensor location, connector design, wire count and OE reference must be verified against the vehicle before purchase.
What Does an Oxygen Sensor Do?
An oxygen sensor, also known as an O2 sensor or lambda sensor, measures the amount of oxygen remaining in exhaust gases after combustion. The ECU uses this information, together with readings from other engine sensors, to help regulate fuel delivery and monitor exhaust system performance.
The upstream oxygen sensor is generally installed before the catalytic converter. On many petrol-engine vehicles, it supplies feedback that helps the ECU adjust the air-fuel mixture during closed-loop operation. This feedback helps the engine management system respond to changes in engine temperature, load and driving conditions.
The downstream oxygen sensor is usually located after the catalytic converter. It commonly monitors exhaust oxygen levels to help the ECU assess catalytic converter performance. Its exact role depends on the vehicle’s emissions control system.
Upstream and downstream sensors are not necessarily interchangeable. They may differ in signal characteristics, electrical specifications, wiring and connector design. Installing an incorrect sensor can cause diagnostic trouble codes or interfere with emissions monitoring. Before purchasing the OX827, identify the faulty sensor’s position and compare its OE part number with the replacement reference.
Key Features and Benefits
1. Supports Accurate Fuel Control
The oxygen sensor provides information that helps the ECU regulate the engine’s air-fuel mixture. Replacing a sensor that has been confirmed defective with a compatible unit can help restore reliable feedback to the engine management system.
2. Helps Maintain Consistent Engine Performance
Incorrect oxygen sensor readings may contribute to unstable idling or inconsistent engine operation if they affect fuel adjustments. When the sensor is the underlying cause, replacement may help restore normal operation.
3. Supports Emissions Monitoring
Oxygen sensor feedback is an important part of the emissions control system in many petrol-powered vehicles. A suitable replacement helps the ECU monitor exhaust conditions and manage emissions-related functions as intended.
4. May Help Address Excessive Fuel Consumption
A faulty sensor can sometimes cause inappropriate fuel corrections. Replacing a confirmed defective sensor may help restore appropriate fuel control. However, fuel economy also depends on driving habits, maintenance, ignition condition and the performance of other engine components.
5. Listed for Selected Honda Accord Applications
The OX827 is listed for selected Honda Accord VTS CL and CL3 applications from 2000 to 2002 with a 2.0-litre, 16-valve inline-four engine. Buyers should verify the exact engine specification and original part reference because different Accord variants may require different sensors.
Common Symptoms of a Faulty Oxygen Sensor
Oxygen sensors operate in a demanding environment and can deteriorate with age. Possible signs of a faulty sensor include:
- Check Engine Light: The ECU may store a diagnostic trouble code related to sensor response, heater operation or exhaust mixture readings.
- Increased Fuel Consumption: Incorrect sensor feedback may cause unsuitable fuel adjustments.
- Rough Idling: The engine may run unevenly if faulty readings affect fuel control.
- Poor Drivability: Acceleration or engine response may become inconsistent under certain operating conditions.
- Emissions Test Failure: A defective sensor or related engine fault may contribute to excessive emissions.
- Unusual Exhaust Odour: An overly rich fuel mixture may produce a stronger fuel smell.
These symptoms do not automatically mean the oxygen sensor is faulty. Exhaust leaks, vacuum leaks, ignition problems, fuel delivery issues, damaged wiring and catalytic converter faults can produce similar symptoms. Diagnostic testing is recommended before replacing the sensor.
Why Correct Fitment Matters
Selecting the correct oxygen sensor is essential for compatibility with the Honda Accord’s engine management system. Sensors may look similar while having different electrical characteristics, connector arrangements, cable lengths or mounting specifications.
Before ordering the OX827, verify:
- The vehicle’s VIN and actual production date.
- The exact engine code and market specification.
- The original sensor’s OE part number.
- Whether the required sensor is upstream or downstream.
- The bank and sensor number, where applicable.
- Connector shape, pin arrangement and wire count.
- Thread size, mounting design and cable length.
- Compatibility with the catalytic converter and emissions system.
Do not rely on the model name, engine capacity or year range alone. If the original part number is uncertain, consult a Honda parts catalogue or qualified automotive parts supplier.
Installation and Maintenance Recommendations
- Diagnose the Fault: Scan the ECU for diagnostic trouble codes and review available sensor data before replacing the component.
- Confirm Compatibility: Match the vehicle’s engine code, OE part number and sensor position to the replacement.
- Allow the Exhaust to Cool: Oxygen sensors operate at high temperatures. Ensure the exhaust system is sufficiently cool before starting work.
- Inspect the Wiring: Check the connector and harness for corrosion, damaged insulation, loose terminals or heat damage.
- Install Carefully: Follow the vehicle manufacturer’s service procedure and tightening specifications. Avoid twisting or stretching the sensor cable.
- Check Related Components: Inspect for exhaust leaks and other faults that could affect sensor readings.
- Verify the Repair: Clear diagnostic codes when appropriate, complete any required drive cycle and confirm that the warning light does not return.
Professional installation is recommended if the sensor is seized or difficult to access, helping reduce the risk of damaging exhaust threads or electrical components.
Fitment Checklist
Before purchasing the OX827 Oxygen Sensor for a Honda Accord VTS, confirm that:
- The vehicle matches the listed CL or CL3 application.
- The production year and engine specification are compatible.
- The engine matches the listed 2.0-litre I4, 16-valve configuration.
- The original OE part number matches the replacement reference.
- The sensor position, connector and wiring configuration are correct.
Conclusion
The OX827 Oxygen Sensor is listed for selected Honda Accord VTS CL and CL3 applications from 2000 to 2002 with a 2.0-litre, 16-valve inline-four engine. It supports the engine management and emissions monitoring systems by measuring exhaust oxygen levels and supplying feedback used for fuel control.
Replacing a sensor confirmed to be faulty may help restore reliable engine management feedback and resolve sensor-related operating issues. Before purchasing, verify the vehicle’s VIN, engine code, OE part number, connector configuration and exact sensor position. Correct identification and installation are essential for suitable fitment and dependable operation.
Reviews
There are no reviews yet.