Buy Car Parts & Accessories Online at Best Prices | Autozone Australia

POLYRIB BELT FITS FORD TRANSIT SWB-MWB VM XXXBD-XXXTT 2006-2013 3 DOOR 2.2 LITRE I4 16V 6PK1675

Original price was: $ 45.00.Current price is: $ 30.00.

The POLYRIB BELT FITS FORD TRANSIT SWB-MWB VM XXXBD-XXXTT 2006-2013 3 DOOR 2.2 LITRE I4 16V 6PK1675 is a replacement accessory drive belt listed for compatible Ford Transit short-wheelbase and medium-wheelbase models manufactured between 2006 and 2013. Designed for the supplied 2.2-litre four-cylinder, 16-valve engine application, this belt transfers rotational power from the engine crankshaft…

1 in stock

Add to Wishlist
Add to Wishlist
SKU: 6PK1675
Category:

Description

The POLYRIB BELT FITS FORD TRANSIT SWB-MWB VM XXXBD-XXXTT 2006-2013 3 DOOR 2.2 LITRE I4 16V 6PK1675 is a replacement accessory drive belt listed for compatible Ford Transit short-wheelbase and medium-wheelbase models manufactured between 2006 and 2013. Designed for the supplied 2.2-litre four-cylinder, 16-valve engine application, this belt transfers rotational power from the engine crankshaft to the compatible belt-driven accessories.

Identified by the specification 6PK1675, this polyrib belt features six longitudinal ribs and a nominal length of approximately 1,675 mm. These dimensions are important when selecting a replacement because the belt must match the pulley grooves and maintain appropriate tension throughout the accessory drive system.

The Ford Transit is widely used for commercial transport, deliveries, trades and everyday work. Its reliability is important to vehicle owners and operators who depend on consistent performance. Maintaining the accessory drive system and replacing worn components when necessary helps support dependable operation and reduce the risk of unexpected interruptions.

Designed for Ford Transit VM Applications

  • This belt is listed for Ford Transit SWB-MWB VM models with the supplied XXXBD-XXXTT identification, covering the 2006-2013 production range. The application details specify three-door body configurations and a 2.2-litre I4 16V engine.
  • The accessory drive system uses a pulley arrangement to transfer engine rotation to supporting components. Depending on the exact engine and vehicle equipment, these may include the alternator, air-conditioning compressor and other belt-driven accessories. The precise arrangement can vary with production specification and installed equipment, making it important to check the original belt and pulley layout before purchasing.
  • A correctly matched belt follows the intended routing path and engages with the corresponding pulley grooves. Selecting the correct rib profile and length helps maintain suitable tension and consistent power transmission during normal engine operation.

Understanding the 6PK1675 Specification

The product code identifies the main characteristics of the replacement belt:

  • 6: Indicates six longitudinal ribs across the inner contact surface.
  • PK: Identifies the metric automotive poly-V belt profile.
  • 1675: Indicates a nominal belt length of approximately 1,675 mm.

The six-rib design provides multiple contact surfaces that engage with matching grooves on compatible pulleys. This arrangement distributes driving force across the width of the belt and supports stable power transmission.

The nominal length is equally important. A belt that is too short may create excessive tension and place additional stress on the tensioner and accessory bearings. A belt that is too long may not maintain the required tension, increasing the possibility of slipping, noise or inconsistent accessory operation.

For accurate replacement, compare the complete 6PK1675 specification with the original belt marking and the vehicle’s requirements rather than relying on visual similarity alone.

The Function of the Accessory Drive Belt

  • The polyrib belt is an important component of the engine’s auxiliary drive system. When the engine runs, the crankshaft pulley rotates and moves the belt around the connected accessory pulleys. This movement provides the mechanical power required by supporting components.
  • The alternator uses this rotation to generate electrical power and help maintain the vehicle’s battery charge. Where the Transit is equipped with belt-driven air conditioning, the belt also operates the compressor responsible for circulating refrigerant through the cooling system. Other belt-driven accessories depend on the same reliable movement according to the vehicle’s configuration.
  • For commercial vehicles, dependable accessory operation is particularly important. A Transit may spend long periods on the road, operate in stop-start traffic or carry equipment and cargo throughout the working day. A worn or damaged belt can interrupt the operation of connected accessories and potentially leave the vehicle unable to perform normally.

Construction and Operating Characteristics

  • A polyrib belt is designed to combine flexibility, grip and durability. Its ribbed inner surface is shaped to engage with compatible pulley grooves, while its reinforced construction helps it withstand repeated bending and mechanical loads during engine operation.
  • Throughout normal use, the belt is exposed to engine heat, vibration, friction and changes in rotational speed. It must flex around different pulley diameters while maintaining effective contact with the driven components. The six-rib profile provides several parallel driving surfaces, helping distribute the load across the belt.
  • Correct alignment and tension are essential for reliable performance. A worn tensioner, damaged pulley or rough bearing can cause uneven belt wear, noise or reduced driving efficiency. Oil, coolant and other fluid contamination can also affect the belt material and its ability to grip the pulleys.
  • Inspecting the complete accessory drive system during replacement helps identify problems that could shorten the service life of the new belt.

Signs That Your Polyrib Belt May Need Replacement

Regular inspection can help identify deterioration before complete belt failure occurs. Common warning signs include:

  • Cracking: Fine cracks across the ribs or belt backing may indicate ageing and material fatigue.
  • Rib damage: Missing, torn or uneven ribs can reduce contact with the pulley grooves.
  • Squealing noises: A high-pitched sound from the engine compartment may indicate slipping, incorrect tension or a pulley problem.
  • Glazing: A shiny or hardened belt surface can suggest excessive friction or slipping.
  • Frayed edges: Uneven wear along the sides may indicate pulley misalignment or incorrect belt tracking.
  • Accessory problems: Charging difficulties or other belt-driven system faults may indicate a problem with the belt or associated components.

If any of these symptoms appear, inspect the complete accessory drive system. Replacing the belt without correcting an underlying pulley or tensioner problem may result in premature wear.

Installation and Maintenance

  • Before installation, compare the replacement belt with the removed component and confirm the six-rib profile and nominal 1,675 mm length. Inspect the pulleys for dirt, corrosion, damage and uneven wear. Check the tensioner and idler pulleys for rough bearings, unusual noise or excessive movement.
  • Follow the correct belt routing information for the specific Ford Transit 2.2-litre engine and accessory configuration. Release the tensioner using the appropriate procedure, position the replacement belt around the pulleys and ensure that every rib sits correctly within its matching groove.
  • After fitting, check the belt routing and seating before starting the engine. Observe the belt from a safe position during initial operation to confirm that it tracks smoothly. Keep hands, tools and loose clothing away from moving components.
  • This is a conventional polyrib belt application, so the vehicle’s original tensioning arrangement should be followed. It should not be treated as a stretch-fit belt unless the manufacturer’s specified system explicitly requires that installation method.

Benefits of Timely Belt Replacement

Replacing a worn accessory drive belt helps maintain dependable operation of the vehicle’s supporting systems. A correctly matched 6PK1675 belt can provide:

  • Consistent power transfer through compatible six-rib pulleys.
  • Support for alternator and battery charging operation.
  • Reliable operation of compatible belt-driven accessories.
  • Reduced risk of accessory interruption caused by belt deterioration.
  • Smooth operation when the tensioner and pulleys are functioning correctly.
  • Improved preventative maintenance for commercial and everyday Transit vehicles.

Regular inspection and timely replacement can help reduce the likelihood of unexpected belt failure, particularly for vehicles that accumulate high mileage or operate under demanding working conditions.

Fitment Verification

This belt is listed for Ford Transit SWB-MWB VM models from 2006 to 2013 with the supplied XXXBD-XXXTT identification, three-door body configuration and 2.2-litre I4 16V engine specification. Before purchasing, confirm the production year, engine details, wheelbase, accessory configuration and existing belt dimensions.

Compare the original belt marking where available and verify the 6PK1675 specification against the vehicle’s requirements. Checking the VIN and consulting a suitable parts catalogue can help confirm compatibility where different production or accessory arrangements exist.

Conclusion

The POLYRIB BELT FITS FORD TRANSIT SWB-MWB VM XXXBD-XXXTT 2006-2013 3 DOOR 2.2 LITRE I4 16V 6PK1675 is a replacement accessory drive belt for compatible Ford Transit applications. Its six-rib PK profile and nominal 1,675 mm length are important specifications for matching the belt to the correct pulley system. With accurate fitment verification, proper installation and regular inspection, this belt helps support reliable accessory operation and the ongoing maintenance of the Ford Transit.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.