Buy Car Parts & Accessories Online at Best Prices | Autozone Australia

POLYRIB BELT FITS MITSUBISHI GRANDIS BA NA4W 2004-2010 4 DOOR 2.4 LITRE I4 16V 6PK1885

Original price was: $ 37.00.Current price is: $ 28.00.

Keep your engine accessories operating reliably with the POLYRIB BELT FITS MITSUBISHI GRANDIS BA NA4W 2004-2010 4 DOOR 2.4 LITRE I4 16V 6PK1885. This multi-rib accessory drive belt is designed to transfer rotational power from the engine crankshaft to compatible engine-driven accessories. It is an important component of the vehicle’s auxiliary drive system, helping essential…

1 in stock

Add to Wishlist
Add to Wishlist
SKU: 6PK1885
Category:

Description

Keep your engine accessories operating reliably with the POLYRIB BELT FITS MITSUBISHI GRANDIS BA NA4W 2004-2010 4 DOOR 2.4 LITRE I4 16V 6PK1885. This multi-rib accessory drive belt is designed to transfer rotational power from the engine crankshaft to compatible engine-driven accessories. It is an important component of the vehicle’s auxiliary drive system, helping essential systems operate while the engine is running.

This belt is listed for the Mitsubishi Grandis BA NA4W manufactured between 2004 and 2010, featuring a 2.4-litre inline four-cylinder engine with 16 valves and a four-door body configuration. The 6PK1885 specification identifies a six-rib profile and a nominal belt length of approximately 1885 mm.

Choosing the correct replacement belt helps maintain proper pulley engagement, suitable tension and consistent power transfer. Whether replacing an ageing belt or carrying out preventative maintenance, checking the original belt specification is an important step towards reliable vehicle operation.

Designed for the Mitsubishi Grandis BA NA4W

  • The Mitsubishi Grandis is a versatile family vehicle designed to provide passenger comfort, interior space and practical everyday performance. Its 2.4-litre I4 engine relies on an accessory drive system to operate supporting components while the engine is running.
  • The polyrib belt connects the crankshaft pulley with compatible accessory pulleys. As the engine operates, the belt follows its designated routing path and transfers mechanical power to the connected components. Depending on the vehicle’s equipment and configuration, these accessories may include the alternator and air-conditioning compressor.
  • For the 2004-2010 Mitsubishi Grandis BA NA4W, selecting the correct belt length and rib profile is important. A properly matched belt helps maintain consistent contact with the pulleys and supports reliable accessory operation.

Understanding the 6PK1885 Specification

The product code 6PK1885 identifies important characteristics of the belt:

  • 6: Indicates six longitudinal ribs along the belt’s contact surface.
  • PK: Identifies the automotive multi-rib belt profile.
  • 1885: Indicates a nominal belt length of approximately 1885 mm.

The six-rib design provides multiple contact surfaces that engage with matching grooved pulleys. This arrangement helps distribute the forces involved in driving engine accessories and provides traction during normal operation.

The nominal length is equally important. A belt that is too short may be difficult to install and could place excessive strain on the tensioning system. A belt that is too long may not maintain sufficient tension, increasing the possibility of slipping or inconsistent accessory performance.

Always compare the replacement specification with the original belt marking and verify that it suits the vehicle’s exact engine and accessory configuration.

The Function of the Accessory Drive Belt

  • The polyrib belt plays an important role in transferring engine power to supporting components. As the crankshaft rotates, the belt moves around the pulleys along its designated routing path.
  • The alternator uses mechanical rotation to generate electrical power and help maintain battery charge. The air-conditioning compressor relies on engine-driven rotation to circulate refrigerant and provide cabin cooling. Other compatible accessories may also receive power through the belt system, depending on the installed configuration.
  • A correctly fitted belt helps these components receive consistent mechanical drive. If the belt becomes worn, loose or damaged, power transfer may become less reliable. This can result in unusual noises, slipping or reduced operation of connected accessories.
  • Maintaining the belt in good condition is therefore an important part of keeping the Mitsubishi Grandis’s auxiliary systems operating as intended.

Construction and Operating Characteristics

  • A polyrib belt is designed to combine flexibility with resistance to the repeated mechanical stresses associated with engine operation. Its ribbed inner surface is shaped to engage with matching pulley grooves, while its flexible construction allows it to travel around pulleys of different diameters.
  • During normal operation, the belt experiences continuous bending, friction, tension, vibration and temperature changes. Over time, these conditions can contribute to material deterioration. A suitable replacement must maintain its profile and contact with the pulley surfaces throughout regular engine operation.
  • The six-rib profile provides several points of contact across the pulley surface. Correct alignment and tension are essential for smooth operation. Worn pulleys, a faulty tensioner or damaged accessory bearings can also contribute to premature belt wear, even when the replacement belt is correctly specified.

Common Signs of Belt Wear

Regular inspection can help identify deterioration before it leads to complete belt failure. Mitsubishi Grandis owners should look for several common warning signs.

  • Squealing or chirping noises: Unusual sounds from the engine compartment may indicate slipping, incorrect tension, contamination or pulley problems.
  • Cracked or damaged ribs: Visible cracks, missing sections or uneven rib wear can reduce the belt’s ability to grip the pulley grooves.
  • Glazed surfaces: A shiny or polished appearance may indicate excessive friction or repeated slipping.
  • Frayed edges: Damage along the belt edges can suggest pulley misalignment, incorrect routing or general deterioration.
  • Accessory performance issues: Charging difficulties or reduced air-conditioning performance may be associated with a fault in the accessory drive system.

These symptoms can have several causes. The belt, tensioner, pulleys and driven accessories should be inspected together to identify the underlying problem.

Benefits of Timely Belt Replacement

Replacing a worn polyrib belt with the correct specification helps maintain dependable power transfer throughout the accessory drive system.

Important benefits include:

  • Reliable engagement with compatible six-rib pulleys.
  • Consistent transfer of engine power to driven accessories.
  • Reduced risk of slipping caused by worn or damaged ribs.
  • Support for normal charging and air-conditioning operation.
  • Improved confidence during everyday driving.
  • Preventative maintenance that helps reduce unexpected belt-related problems.

Replacing a deteriorated belt before it fails completely also provides an opportunity to inspect the surrounding pulleys and tensioning components.

Installation and Maintenance Recommendations

  • Before installation, compare the replacement belt with the original component and confirm the 6PK1885 specification. Inspect pulley grooves for dirt, corrosion, damage and accumulated debris. Check the tensioner and idler pulleys for smooth movement, excessive play and unusual bearing noise.
  • Follow the correct belt routing diagram for the specific Mitsubishi Grandis 2.4-litre engine configuration. Ensure all six ribs are correctly seated in their corresponding pulley grooves. Incorrect routing or incomplete seating can cause premature wear and unreliable accessory operation.
  • Use the manufacturer’s recommended procedure when releasing and resetting belt tension. After installation, inspect the belt’s alignment and confirm that it follows the intended pulley path. Any abnormal noise or movement should be investigated before the vehicle returns to normal use.
  • Routine inspection during scheduled servicing can help identify deterioration early and support long-term accessory drive reliability.

Fitment Verification

This product is listed for the following application:

  • Make: Mitsubishi
  • Model: Grandis BA NA4W
  • Years: 2004-2010
  • Body style: 4 Door
  • Engine: 2.4 Litre I4
  • Valve configuration: 16V
  • Belt specification: 6PK1885

Confirm compatibility using the vehicle identification number (VIN), engine details, original belt markings and installed accessory arrangement. Production variations and differences in accessory equipment may affect belt requirements, so verify the required length and pulley routing before ordering.

A Practical Replacement for Your Mitsubishi Grandis

The POLYRIB BELT FITS MITSUBISHI GRANDIS BA NA4W 2004-2010 4 DOOR 2.4 LITRE I4 16V 6PK1885 is a replacement accessory drive belt listed for the specified Mitsubishi application. Its six-rib PK profile and approximately 1885 mm nominal length provide the essential details for checking compatibility.

Maintaining a correctly fitted belt helps support the operation of important engine accessories and contributes to dependable everyday vehicle performance. Combined with regular inspection of the pulleys and tensioning components, timely belt replacement is an important part of maintaining your Mitsubishi Grandis.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.